Skip manual setup, Download VPNReactor for Mac

  • Easy setup with auto installer.
  • No configuration. Connect/Disconnect your VPN with 1 click.
  • Easily switch between VPN Servers & Protocols.
  • Advanced VPN protocols not available with Manual setup.
  • Automatic VPN server & Software updates.
Download VPNReactor for Mac

Video Walkthrough

Watch the following Video Walkthrough OR read the detailed instructions below.

1. Click “System Preferences

VPN-OSX-setup01

2. Select “Network

VPN-OSX-setup02

3. Click on the plus symbol in the lower left corner to add a new connection. (Note: you may need to click the lock icon in the lower left to unlock the preference pane and make changes.)

VPN-OSX-setup03

4. Under “Interface” select “VPN“.

VPN-OSX-setup04

5. Set the VPN Type: PPTP and Service Name: VPNReactor and Click ‘Create

VPN-OSX-setup05

6. Then configure as follows:

  • Configuration: Default
  • Server Address: (Enter one of VPNReactor server address)
    CLICK HERE FOR SERVER LOCATIONS
  • Account Name: (Your VPNReactor Username)
  • Encryption: Select Maximum (128-bit only)

Then check on “Show VPN Status in menu bar

VPN-OSX-setup6

 7. Click on “Authentication Settings” to set “Password

VPN-OSX-setup7

8. Enter your VPNReactor password in ‘Password’ field then Press “OK” and Click the checkbox for “Show VPN status in menu bar” (if desired)

VPN-OSX-setup08

9. Click “Advanced

VPN-OSX-setup9

10. Click “Options” tab and check “Send all traffic over VPN connection

VPN-OSX-setup10

11. Now click “TCP/IP” tab and set IPv6 to “Link-local only“, then OK

VPN-OSX-setup11-link-local-only

12. Click “Apply” in the lower right corner.

VPN-OSX-setup012

13. To use VPNReactor, Click “Connect VPNReactor

VPN-OSX-setup13